Dielectric Strength 2500Vac (IRAM NM 247 - 1 / IEC 60227 - 1).

Equipment designed for the Dielectric Strength Test on cables.

It has a variable output voltage between 1000Vac to 2500Vac.

Download Brochure

Equipment designed for the Dielectric Strength Test on cables.

It has a variable output voltage between 1000Vac to 2500Vac.

To perform the test of Table 3, the IRAM NM 247-1.

This test was performed on the wire immersed in water with a temperature of 20 °C.

The sample must be subjected to these conditions for 1 hour.

Then apply the test voltage for 5 minutes.

Device Specifications
Power Supply: 220Vca, 50 Hz, Single-phase.
Output Voltage:
  • 0 y 2,5 Kvca.
Display Indicator:
  • Display LCD de 2 Líneas.
  • Failure Test.
Specifications:
  • To use over table.
  • Totally controlled by microcontroller.
  • Pliers Test.
Dimensions:
  • 350 x 450 x 300 (h).
  • Weight: 35 Kg.
Accessory:
  • Clamps Test.
Guarantee:
  • 12 months.
According to:
  • IRAM NM 247-1.
  • IEC 60227-1
Dielectric Strength 2500Vac Dielectric Strength 2500VacDielectric Strength 2500Vac