This equipment is used for the tests of the basic parameters of electrical safety in the end of lines of producing plants of household-electric, electronic equipment, lights, machines tools, etc of high volume.
Test makes them of:

The Assembled cables tester can make this test:

• Ground Test Wire:
  Measuring the resistance of the earth conductor by applying a current of 20 Aac (<12V).
  The maximum dimension of this test can be specified.
  This test can be omitted.
• Dielectric Strenght between Line (L) and Neutral (N):
  The test is carried out by applying on the side of the plug, for a period of 1 s a voltage of:
  • 2000 Vac ± 10 % for accessories with a nominal voltage exceeding 130 V;
• Dielectric Strenght between Line-Neutral (L-N) and Ground:
  The test is carried out by applying on the side of the plug, for a period of 1 s a voltage of:
  • 2000 V ± 10 % for accessories with a nominal voltage exceeding 130 V;
• Verification of polarity and phase continuity (L):
  Verification of polarity and phase continuity applying a voltage of 24 Vac.
• Verification of polarity and Neutral continuity (N):
  Verification of polarity and neutral continuity applying a voltage of 24 Vac.