Our equipment Damage to Conductor 2014 was designed and manufactured to perform the test specified in many standards (IRAM 60884-1, BSEN 60669-1, BS 5733) to the damage to conductors.
The GLOW WIRE TEST APPARATUS 2009 from Seguridad Electrica is Fully automated test equipment for fire hazard testing as per IEC 60695-2-10, controlled by microcontroller.
The best method for testing electro technical products with regard to fire hazard is to duplicate exactly conditions occurring in practice.
The TRACKING INDEX TEST APPARATUS from Seguridad Electrica is designed to determining the Comparative tracking Index (CTI).
Our equipment is totally controlled by PC (Embedded PC) with drop indication, voltage indication, current indication and timer indication on a 15” digital display LCD.
The Spark Test 2012 equipment (Spark Tester) is designed to perform the test in dry voltage between electrodes (spark test), to check the insulation of electrical conductors during the manufacturing process or in subsequent phases of production, the 100% production.
IEC 62230 – Electric cables - Spark-test method.
Impact Test Apparatus 0 - 1J
Impact Test Apparatus 2J
Impact Test Apparatus 5J
Impact Test Apparatus 10J / 20J
Spring Operated Impact Hammer
Calibration Devices for Spring Hammer
Striking Element 50J
Ball Pressure Test (20N)
Black Test Corner 800 x 1000 x 1500
Damage to Conductors
Dielectric Strength tester 5Kv
Ground Continuity Tester 12Vca / 25Aca
Glow Wire Test Apparatus 2012
Leakage Current Measurement
Needle Flame Burner Ø0.5mm
Programmable off-switching counter
Residual Voltage Meter
Resistive Load Bank
Test Chamber 0.5m3 / 20Lux
Torque Tester Apparatus
Tracking Index Test Apparatus
Articulated Children Test Finger Ø8.6mm
Articulated Test Finger
Rigid Test Finger
Test Finger Nail
Short Taper Test Pin
Long Taper Test Pin
Test Sphere Ø 50 mm With Guard
Test Sphere Ø 50 mm
Test Sphere Ø 12.5 mm
Test Rod Ø 2,5 mm
Test Wire Ø 1,0 mm
Control Panel for Accessibility (60Vac)