Spark Test 2012 - Spark tester (IRAM-NM 244 / IEC 62230).

The Spark Test 2012 was designed to perform the test in dry voltage between electrodes (spark test), to check the insulation of electrical conductors during the manufacturing process or in subsequent phases of production.

Download Brochure

The Spark Test 2012 equipment (Spark Tester) is designed to perform the test in dry voltage between electrodes (spark test), to check the insulation of electrical conductors during the manufacturing process or in subsequent phases of production, the 100% production.

IEC 62230 – Electric cables - Spark-test method.

The SPARK TEST APPARATUS / SPARK TESTER from Se.com is designed and manufactured to perform the test specified in IEC 62230 and IRAM 244 to determine defects in the insulation or sheathing layers of electrics cables during the extrusion or rewinding process has become standard procedure today.

Dielectric Testing with the Spark Test method (Dry Test):

  • single conductors (unwrapped).
  • components insulated conductors of a cable (veins).
  • meetings of insulated conductors (veins) of wires before being applied the wrapper.
Device Specifications
Power Supply: 220Vca, 50 Hz, 6 A, single phase (115 Vca optional).
Test Voltage:
  • 0 to 10 Kvca.
Electrodes:
  • Electrode spheres chain.
  • Electrode of 250 mm of length (until 80m/min.).
Indicators:
  • Indicator of Voltage Test..
  • Fault indicator:
    • Visible indication.
    • Audible indication.
Specifications:
  • Clear acrylic cover for safety.
  • Output NC (normal closed) to connect the machine of cable passage.
  • Vertically adjustable table (Optional).
  • Protection switch off the Spark Tester when you lift the dome.
Control: Totally controlled by microprocessor.
Dimensions:
  • 350 x 450 x 300 (h).
  • Weight: 35 Kg.
  • Table Weight: 10 Kg.
Guarantee:
  • 12 months.
According to:
  • IRAM-NM 244.
  • IEC 62230.
Spark Test 2012 - Spark tester 10KV Spark Test 2012 - Spark tester 10KVSpark Test 2012 - Spark tester 10KVSpark Test 2012 - Spark tester 10KV